Describe How a Triac Can Be Tested

Question

Examlex · Accepted Answer

The Answer is The triac can be tested with an ohmmeter. To test the triac, connect the ohmmeter leads to MT2 and MT1. The ohmmeter should indicate no continuity. If the gate lead is touched to MT2, the triac should turn on and the ohmmeter should indicate continuity through the triac. When the gate lead is released from MT2, the triac may continue to conduct or it may turn off, depending on whether the ohmmeter supplies enough current to keep the device above its holding current level. This tests one-half of the triac.

To test the other half of the triac, reverse the connection of the ohmmeter leads. The ohmmeter should indicate no continuity. If the gate is touched again to MT2, the ohmmeter should indicate continuity through the device. The other half of the triac has been tested.

Describe How a Triac Can Be Tested

Definitions: